Burgundy Lamp Fragrance Ambientair Lacrosse Absolute Burgundy Lamp Fragrance

1. Choose a location for the lamp: a flat and stable surface, away from heat sources and out of reach of children and/or pets.
2. Use a funnel to fill the lamp body to two-thirds of its capacity with a liquid suitable for catalytic lamps. Remember, the liquid can be neutral or scented, and you can mix them to achieve a milder fragrance. After filling, clean the lamp body and surface to remove any liquid residue.
3. Insert the burner and ensure its wick is in contact with the liquid, and that the stone is properly positioned above the lamp's metal base. If using the burner for the first time, cover the stone with a cap (to prevent aroma evaporation) and let the wick soak for 20 minutes.
4. Remove the cap and use a lighter to ignite the burner, leaving the flame for two minutes. Wait for a flame approximately 7 to 10 cm (3 to 4 inches) high, which will reduce in size with the burner. Do not leave the lamp unattended during these two minutes, and never touch the stone during this process.
5. Blow out the flame, and once it is extinguished, cover the stone with the protective crown. The stone will be hot, so do not touch it: your lamp is now operating.
6. Allow the lamp to purify the atmosphere and cleanse the air for about 20 minutes in an area of approximately 10 square meters.
7. To stop the operation, carefully remove the crown, as it may be warm, and cover the hot stone with the metal cap to prevent further burning and aroma evaporation.
8. For storage until the next use, leave the cap and crown on the metal base of the lamp body so everything is ready for next time.